Thousands of shipping containers travel across oceans each day to deliver agricultural commodities. Temperature fluctuations and changes in climate play a crucial role in the condition of the commodities being shipped. Poor fumigation practices at origin, especially for commodities with high-levels of infestation, leads to additional expense, trade dispute or rejection.
The development of condensation inside shipping containers during shipment is a huge problem for commodity traders. Condensation happens because of poor air movement and temperature fluctuation inside the shipping container. When condensed water is present, it can result in mold growth, insect infestation and damaged commodities.
It is common to require the fumigation of shipping containers before leaving port. To do this, the rented container has to remain idle for several days to be fumigated. This is very costly and the exposure time is short because shipping containers are not gastight, thus only adult insects are affected. Eggs survive and hatch when the humidity and temperature in the container become favorable during transport.
An organic solution that continuously and safely stops infestation, while minimizing condensation during transit is needed to minimize costs associated with fumigation and to prevent the commodities from getting rejected at the destination.
Most of the time, using patented and Ultra Hermetic™ standard GrainPro TranSafeLiner™ (TSL™) is sufficient to protect the commodity against insect damage, moisture and humidity. For better protection, the patented GrainPro TranSafeliner Gas Hermetic Fumigation™ (TSL G-HF™) is the recommended solution because it effectively addresses infestation and the build-up of condensation during transit in shipping containers.
Made from multi-layered film, the GrainPro TranSafeliner G-HF™ is a specially designed Ultra Hermetic™ liner with superior gas and moisture barrier properties. It effectively isolates the commodity from ambient air with its varying moisture content to protect it against the permeation of air and moisture, thereby, minimizing condensation.
Furthermore, the GrainPro TranSafeliner G-HF™ is designed for CO2 fumigation before departure. Carbon dioxide (CO2) can be flushed through an expansion pipe with an integrated, end-to-end air duct at the top of the liner to allow oxygen to escape. This type of fumigation is safe and environment-friendly due to the inert characteristics of CO2 and the gas tightness of the liner inside the container. The GrainPro TranSafeliner G-HF™ stops mold development and insect infestation, eliminating insects of all life stages while in transit; without residues of harmful chemicals that lead to rejection at the destination port.
The amount of CO2 to be used for a 20’ container varies from 25 to 30 kg depending on the density of the commodity.
• Easy to use multi-commodity transport solution
• A completely Green technology that allows rapid fumigation using safe CO2
• Prevents mold development and infestation
• Reduces condensation
• Easy to set up and use
• Cost-efficient solution
• A solution accepted by the organic market
|TSL-20 G-HF||TSL-40 G-HF|
|Material||Multi-layer Polyethylene (PE)||Multi-layer Polyethylene (PE)|
|Length, Tube Circumference, m||8.75, 10||14.75, 10|
|Closing Mechanism||3-track zipper and combo zipper slider||3-track zipper and combo zipper slider|
|Packed Dimension (LWH), cm||100 x 100 x 7||100 x 100 x 10|
|Packed Weight, kgs||9||15|
|Oxygen Transmission Rate (OTR), cm3/m2/day||2||2|
|Water Vapor Transmission Rate (WVTR), cm3/m2/day||2||2|